How to install and replace the shower filter

Aug 28, 2024 Leave a message

The installation and replacement methods of the shower filter are as follows:
1. Installation method:
Prepare tools and materials: shower filter, wrench, raw tape.
Turn off the water source: Find the main water valve in your home and turn it off to prevent water from spraying out during installation.
Remove the shower: Use a wrench to remove the shower from the water pipe.
Install the filter: Screw the shower filter onto the water inlet of the shower, pay attention to the direction, and make sure that the filter is tightly connected to the shower. If necessary, you can wrap some raw tape around the connection to increase the seal.
Install the shower: Screw the shower with the filter installed back onto the water pipe and tighten it with a wrench.
Turn on the water source: Slowly open the main water valve and check whether the shower filter is leaking. If there is a leak, you can check whether the connection is tightened or whether the raw tape needs to be replaced.


2. Replacement method:
Turn off the water source: Find the main water valve in your home and turn it off to prevent water from spraying out during replacement.
Remove the old filter: Use a wrench to remove the old shower filter from the shower.
Clean the shower: Clean the impurities and dirt inside the shower, you can use a toothbrush or other cleaning tools.
Install the new filter: Screw the new shower filter onto the water inlet of the shower, pay attention to the direction, and make sure the filter is tightly connected to the shower. If necessary, you can wrap some raw tape around the connection to increase the seal.
Turn on the water source: Slowly open the main water valve and check whether the shower filter is leaking. If there is a leak, you can check whether the connection is tight or whether the raw tape needs to be replaced.
It should be noted that there may be some differences between different brands and models of shower filters, so before installation and replacement, it is best to read the product manual first to understand the specific operation methods and precautions.


If you are interested in the installation and replacement methods of shower filters, we sincerely invite you to visit www.angefilter.com! There is a wealth of product information here, as well as industry-leading technical trends and professional customer service.

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry