What affects the life of PP melt-blown filter elements

Nov 23, 2024 Leave a message

1. Water source conditions:
Water quality impurity content: If there are a lot of impurities in the water source and the particle diameter is large, such as filtering river water, yellow mud water, etc., the surface of the filter element will accumulate impurities faster, the clogging speed will be accelerated, and the service life will be shortened; in contrast, filtering municipal tap water with relatively few impurities, the filter element life is longer.
Chemical properties of water: If there are more chemicals such as strong acids, strong alkalis or organic solvents in the water, it may cause corrosion or damage to the PP meltblown filter element, affecting its service life.

 

2. Frequency of use:
Under the same use environment and maintenance conditions, the longer the use time and the higher the frequency of use, the greater the loss of the filter element and the shorter the life. A filter element used for 8 hours a day will definitely be more durable than one used for 24 hours a day.

 

3. Product quality:
Raw material quality: High-quality PP material has better corrosion resistance, high temperature resistance and mechanical strength, and the filter element produced has a longer service life. If the manufacturer uses inferior PP raw materials, the performance and life of the filter element will be greatly reduced.
Manufacturing process: Advanced melt-blown process and strict production quality control can ensure the structural uniformity and filtration accuracy of the filter element, so that the filter element has better filtration effect and longer service life.

 

4. Filtration pressure difference:
During the filtration process, if the pressure difference at both ends of the filter element is too large, the filter element will be subjected to greater pressure, resulting in structural deformation and fiber breakage of the filter element, thus affecting the service life of the filter element. When the pressure difference reaches a certain level (such as above 2bar), the filter element needs to be cleaned or replaced.

 

5. Maintenance:
Regular cleaning: For some PP melt-blown filter elements that can be cleaned, regular cleaning can remove impurities on the surface of the filter element, restore the filtration performance of the filter element, and extend its service life. However, when cleaning, pay attention to using the correct method and cleaning agent to avoid damage to the filter element.
Correct installation: When installing the filter element, if the installation is not firm, skewed, or the two ends are not strictly aligned and pressed, it may lead to poor filtration effect, and the filter element will be subjected to uneven pressure during operation, affecting its life.

 

If you want to know more about the factors that affect the life of PP melt-blown filter elements, please contact ANGE Environmental Technology for more consultation. Our professional team will provide you with 7*24 service.

https://www.angefilter.com/

 

Send Inquiry

whatsapp

Phone

E-mail

Inquiry