The PP meltblown cartridge filter for water treatment uses deep-layer fine polypropylene or glass fiber membrane as the filter material, with a large diameter of 6 inches/152mm, no center rod, one-way opening, and a specially designed liquid flow direction from the inside to the outside. Ensures that all contaminant particles are trapped inside the filter element. The super-large flow rate design significantly reduces the use of filter elements and filters in the same flow rate application, which greatly saves the input cost of water filter elements and labor costs.

Typical Features
1. The combination of surface filtration and depth filtration can greatly reduce the number of filter elements and significantly reduce the size of the supporting shell compared with ordinary filter elements;
2. The filter layer is made of high-efficiency and low-resistance materials, which can achieve an ultra-high filtration efficiency of more than 99%, and prolong the service life of the filter element;
3. The convenient handle design significantly reduces the time to replace the filter element, making filter element replacement easy and portable.
4. The overall polypropylene design and hot-melt welding treatment can effectively prevent the end cover from falling off and secondary pollution.
5. The design of the sealing interface reduces the risk of side flow and ensures the sealing and reliability of the filter;
6. The folded design increases the filter area and makes the pressure drop significantly lower than that of ordinary filter elements.
7. The design of large diameter increases the amount of dirt, prolongs the service life and reduces production costs;
8. Equipped with a skeleton to enhance the pressure resistance of the filter element during use;
https://www.angefilter.com/




