Features of PP Melt Blown Sediment Water Filter Cartridge

Feb 27, 2023 Leave a message

The main body of the PP melt blown sediment water filter cartridge has a diameter of 6 inches (152.4mm), a single end opening, and the fluid direction is from the inside to the outside. The large diameter design can not only increase the effective filtration area, but also greatly reduce the number of filter elements and reduce the size of the shell. The external structure of the large-flow water filter element uses reinforced polypropylene (PP) skeleton, and the filter layer uses polypropylene microporous membrane pleated structure, which has a large amount of dirt holding capacity and a long service life. The end cover and the filter layer are all welded by hot melt technology, the structure is stable, and it can be used in various fields. It can be used for various traffic requirements, and the hardware has a price competitive advantage.

PP Melt Blown Sediment Water Filter Cartridge

Main Features
1. The flow rate of a single filter element is large, and the number of filter elements to be replaced is small;
2. It adopts the gradient aperture structure, which has a large amount of dirt holding capacity;
3. Adopt high-quality imported filter material;
4. With the filter method of in-in and out-out, all impurities are intercepted inside the filter element;
5. No metal skeleton, minimizing the loss caused by discarding;
6. The U-shaped sealing groove of the large-flow water filter element ensures high filtration efficiency.

https://www.angefilter.com/

Send Inquiry

whatsapp

Phone

E-mail

Inquiry