PP melt-blown filter element is a tubular filter element made of non-toxic and tasteless polypropylene particles, which are heated and melted, sprayed, drawn, and formed. If the raw material is mainly polypropylene. It can be called PP melt blown sediment water filter cartridge. It is not only used in large quantities for water purification, but also has outstanding chemical compatibility and is suitable for filtration of strong acids, strong alkalis and organic solvents. Strong dirt holding capacity, long service life and low cost.
Technical Parameters of PP Meltblown Filter Element:
Sterilization: Tolerate 126°C, 30 minutes online steam sterilization.
Endotoxin: The water extract of the filter column has been tested by IAL, and the endotoxin content is less than 0.5EU/ml
Performance Characteristics of PP Melt Blown Filter Element:
(1) Filtration efficiency and filtration precision, the pore size density of the filter element is uniform, and the filtration efficiency is over 99%.
(2) The filtration resistance is small, the filtration flow rate is large, the dirt holding capacity is large, and the service life is long. The fiber diameter and gap of this product can be adjusted during the production process. The amount, the filter element is not easy to block, and the service life is extended.
(3) It has high cleanliness, no pollution to water quality, acid, alkali and organic solvents, and corrosion.
(4) High strength, the filter element will not deform when the water pressure difference between the inlet and outlet of the filter exceeds 0.4Mpa, and the filtration efficiency will not decrease when the temperature exceeds 90°C. (5) After the treatment and modification of polypropylene, this product has extremely high hydrophilicity and can absorb ten times the weight of water, so it can be used for oil-water separation.
https://www.angefilter.com/