1. Structural factors of the filter element itself
Porosity: Porosity is a key factor affecting flux. High porosity means that there are more and more spacious channels inside the ceramic ball filter element for fluid to pass through, and the flux will be larger.
Ceramic ball particle size and particle size distribution: Ceramic balls with moderate particle size are conducive to flux. If the particle size is too small, the gap between the balls is small, and the fluid is difficult to pass through; if the particle size is too large, although the gap is large, it may affect the filtration accuracy and structural stability, resulting in uneven fluid flow and reduced flux. Moreover, uniform particle size distribution allows the fluid to pass evenly, avoids local blockage, and improves flux.
Filter element shape and size: The shape and size of the filter element are also important. Like tubular filter elements, due to their large filtration area and good fluid permeability, the flux may be higher. At the same time, the larger the size, the larger the filtration area, and the flux will increase to a certain extent. However, too large a size may cause uneven internal fluid distribution and affect flux stability.
2. Filter medium characteristics
Viscosity: The viscosity of the filter medium has a significant effect on the flux. High-viscosity liquids have poor fluidity, such as thick grease, which passes slowly through the ceramic ball filter element and has a low flux; while low-viscosity liquids, such as water, have a relatively high flux.
Impurity content: If the impurity content in the filter medium is high, especially tiny particles, suspended matter, etc., it is easy to block the pores of the ceramic ball filter element, causing the flux to drop rapidly.
3. Filtration condition factors
Filtration pressure and pressure difference: Within a reasonable range, increasing the filtration pressure can increase the flux. However, too high pressure may damage the filter element. Moreover, excessive pressure difference indicates that the fluid has a large resistance in the filter element, which will lead to a decrease in flux.
Ceramic ball surface properties: The smoothness of the ceramic ball surface affects the flux. The smoother the surface, the smaller the fluid flow resistance and the greater the flux. In addition, the hydrophilicity of the ceramic ball also has an effect. Ceramic balls with good hydrophilicity are more conducive to the passage of polar liquids such as water, while hydrophobic ceramic balls may have more advantages when filtering non-polar liquids.
If you are interested in learning more about the flux of ceramic ball filter elements, please pay attention to www.angefilter.com and start your efficient journey. We look forward to working with you to provide customized product solutions for your company.
https://www.angefilter.com/




